Description
Note: Since each product size uses the same PCB board, the silk screen on the back will appear the same, but the actual parts used are different, please test to get the product
AC input (VAC) AC85-280V
DC input (VDC) DC100-380V
Frequency range (KHz) 50-70
Input current (A) 0.06/115VAC 0.03/230VAC
Inrush current (A) Cold start: 5A/230VAC
Efficiency (TYP) ≧ 73%-78%
No-load standby (mW) 5V≤30MW 12V≤75MW
Operating temperature °C – -40 °C to 70 °C
Temperature drift coefficient – ±0.02%/℃
Storage temperature and humidity – -40…+85℃ 10-95RH
Switching frequency (KHz) – 60-69 (frequency conversion control chip)
Insulation voltage (VAC) input to output, test 60s≤5mA 3000V
Insulation resistance (MΩ) input to output, 500VDC <100
Leakage current (MA) 500VDC input to output≤1mA/RMS
Product Life MTBF Rated Input Voltage <100℃>10000H
<70℃>50000H
Safety Class – Adaptation: CLASS B
Vibration Resistance – 10-500Hz 2G 10min/cycle
X, Y, Z each 10Min
3.3 Output Characteristics
Test item Condition Parameters
Output Voltage (VDC) – 5V±5% 12V±5% Others±5%
Output Voltage Accuracy – 5-5.25V 11.5-12.7V
Rated current (MA) – 1500MA 700MA
Rated Power (W) – 7.5W
Ripple and Noise (mvp-p) Rated input voltage 20MHz bandwidth 0.4% of output voltage
Linear Regulation Full Load ±1%
Load regulation 10-100% load ±3%
Start. Rise time Full load 836ms, 7.4ms/90VAC
500ms, 7.4ms/230VAC
Hold time (ms) 16ms/115VAC 50ms/230VAC
Overload protection
Rated input voltage 105%-130% of rated output power
Protection Mode: Intermittent Mode, Load Abnormal Conditions Abnormal
Auto-reply after removal
Short-circuit protection Long-term short-circuit, self-recovery
Over-temperature protection Self-start protection and self-recovery when the temperature exceeds 125°C
Overvoltage protection The VCC voltage is lower than 70% of the calibration voltage due to external abnormality; when the VCC voltage is higher than 15% of the calibration voltage due to an external abnormality, the VCC overvoltage protection is activated immediately
Startup delay time (ms) Vin: 230VAC 100ms
Power-off hold time (ms) 500ms
5V2000MA /12V1000MA/24V500MA:
Input characteristics:
Ac input (VAC) : AC90-265V
Dc input (VDC) : DC90-380V
Frequency range (HZ) : 47-63
Input current (A) : (0.06/115VAC)/(0.03/230VAC)
Surge current (A) : Cold start: 5A/230VAC
Efficiency (TYP) : ≥70%-75%
No-load standby (mW) :5V ≤45MW / 12V≤75MW
Output characteristics:
Output voltage (VDC) : 5V±5% / 12V±5%/24V±5%
Output voltage accuracy: 5-5.25V / 11.5-12.7V
Rated current (MA) : 2000MA /1000MA/500MA
Rated power (W) : 10W
Ripple and Noise (MVP-P) : Rated input voltage 20MHz bandwidth – 0.4% of output voltage
Linear adjustment rate: 10-100% load -±3%
Start-rise time: Full load condition -836ms, 7.4ms/90VAC / 500ms, 7.4ms/230VAC
Holding time (ms) : Full load condition -25ms/115VAC-230VAC
Overload protection: Rated input voltage – Rated output power 105%-130% Protection mode: intermittent mode, abnormal load, abnormal condition, automatic recovery after removal
Short circuit protection: Rated input voltage – short circuit length – self – recovery
Overtemperature protection: Rated input voltage – over 120 ° C – Self-start protection, self-recovery
Over voltage protection:
Rated input voltage – VCC voltage is lower than 70% of the calibration voltage due to external abnormity;
VCC voltage is 15% higher than the calibration voltage due to external anomalies; Activate VCC overvoltage protection immediately
Username –
Review